TRUST MOUSE AMI PS/2 Driver
Of the mouse can be connected to the PS/2 port of your computer. The mouse Before connecting the TRUST AMI MOUSE S CORDLESS to the PS/2 port. Price, review and buy Trust - AMI DUAL PS/2 at best price and offers from Shop Mouse at Trust. Trust Ps-2 Mouse Mi Ami Mouse Single Scroll Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP. Uploaded on 4/25/, downloaded.
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* [*Free Registration Required]|
TRUST MOUSE AMI PS/2 Driver
TRUST MOUSE AMI 250S WIRELESS Driver 1.2
Transcription 1 Method when using for the first time Chapter 1. Uninstalling old drivers and devices 3.
Installation in Windows 3. Checking after the installation 3. This mouse allows you to work optically without the use of wires. TRUST MOUSE AMI PS/2 mouse has two channels and 5 buttons. It is not necessary to replace the batteries.
Trust - AMI DUAL PS/2 Souq - Egypt
You can simply recharge the NiMH batteries provided by placing the mouse, including the batteries, into the recharger. Use a slightly damp, soft cloth to clean the mouse. These may harm the material. This will damage the device. Do not use this device near water.
Do not use this device in an area where the cable can become worn or damaged TRUST MOUSE AMI PS/2 a result of people walking over it. If this device is used outside of the EU, check whether this device meets local regulations. It may, therefore, be possible that the functionality of this product is limited by or is limiting for other wireless products.
This can only be avoided by paying attention to the distance between products and, where possible, by changing channels. U K 1 2 3 Installation 3. Make sure the computer is turned off.
Connect the adapter to connection A on the RF receiver see figure 1. Insert the adapter into the plug socket.
Select a channel 1 or 2 using the channel selection switch A on the bottom of the RF receiver see figure 2. Open the battery cover A TRUST MOUSE AMI PS/2 the bottom of the mouse see figure 3.
Trust AMI MOUSE S OPTICAL E-MAIL driver Keyboards software versions
Use the channel selection switch on the inside of the mouse s battery compartment to select the same channel as you selected on the RF receiver. Insert the batteries into the battery compartment. The diagram inside the battery compartment shows how the batteries should be inserted. Turn the computer on.
TRUST MOUSE AMI PS/2 green indicator F on the RF receiver will be lit when the computer is turned on see figure 4.
Immediately press the detection button B on the bottom of the RF receiver see figure 2. The green indicator on the RF receiver will start to flash.
Trust Ps-2 Mouse Mi Ami Mouse Single Scroll Driver Download Version
Next, press the detection button B on the bottom of the TRUST MOUSE AMI PS/2 once see figure 3. The green indicator on the RF receiver will start to flash more quickly. A connection has been made once the green indicator remains continuously lit. Your mouse is now ready for use. The software supplied should be installed for full use of the extra buttons on your mouse.
Inserting the batteries incorrectly will cause damage. The NiMH batteries provided are rechargeable. The batteries will be recharged when the mouse is placed in the RF receiver.
The batteries will only be recharged if the RF receiver has been connected to the power supply using the power adapter TRUST MOUSE AMI PS/2. The batteries will last for 8 to 10 hours with continuous use without the mouse being placed in the sleep setting. The batteries work for 2 weeks with normal use. For the best results, charge the batteries for 8 hours or until the red indicator on the recharger flashes before using the mouse see chapter 4.